0 Mitsubishi Asx XB LEFT Tail Light (Inner) 2010-2019 OEM Genuine
🔸 Part Description: - Mitsubishi ASX (XA, XB, XC Series) Left Hand Tail Light (LH / Driver's Side). - Position: Inner Section (Tailgate / Hatch Mounted). - Removed from: 05/2016 Mitsubishi ASX LS Wagon (XB MY15.5). - Brands: Genuine Mitsubishi OEM (Factory Original). Ensures perfect weather sealing and electrical compatibility compared to aftermarket alternatives. 🧰 Benefit: This is a Genuine Factory Lamp. Buying OEM ensures the light output and color perfectly match your existing lights, avoiding the "mismatched" look of cheap replicas. 📦 WHAT IS INCLUDED: 🎁 Inner Tail Light Assembly Only ; 1x LH Inner Tail Lamp unit. ❓🚦 Note on Accessories: This listing is for the lens and housing assembly. While the internal bulb holder and bulbs may be included as a FREE BONUS, they are considered consumable items and are not covered by warranty. 💡 DISMANTLING WHOLE VEHICLE - NEED THE OUTER LIGHT OR BUMPER? - We are selling the LEFT INNER TAIL LIGHT in this listing. However, we are dismantling this ENTIRE CAR! 👉 Please Message Us or Call to arrange a separate listing for: 🪟 Door Components: Front Door Glass, Window Regulator/Motor, Internal Door Trim Card. 🪞 Side Mirror: 7-Pin Power Folding LED Mirror (Silver). 🛠️ Mounting: Door Hinges, Check-Strap, Door Weatherstrips. 🚘 Exterior: Tailgate/Hatch, Rear Bumper, Outer Tail Lights. 🎛️ Electronics: Master Window Switch, Interior Door Trim Card. ⚙️ Mechanical: 2.0L 4B11 Engine, CVT Transmission. 🔹 Key Features & Benefits: - 💎 Crystal Clarity: No sun-fade or "pinking" of the lens. - 🛡️ Weather Sealed: Factory-bonded lens prevents condensation and internal reflector damage. - 🧱 Structural Integrity: No cracks or deep gouges that would fail a Roadworthy Certificate (RWC). - 🛠️ Easy Installation: Direct bolt-on replacement to the tailgate. No modifications required to your factory wiring harness. 🚗 Vehicle Compatibility: Suits Mitsubishi ASX (XA, XB, XC Series). ✅ Direct Fit: 05/2010 to 09/2019 (Before the major "T-shape" LED facelift in late 2019). ✅ Models: Fits all 2WD and AWD variants (LS, XLS, Exceed, Aspire). ⚠️ Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. 💎 Condition: - Visual: Excellent Used Condition. - Wear Report: Shows negligible surface wear consistent with a well-maintained vehicle. No major defects detected on the lamp itself. 🚚 SHIPPING & PICKUP (VIC): ✅ Local Pickup (Free) – South Dandenong VIC (by appointment). (Pickup is highly recommended!) 🛠 INSTALL AVAILABLE – Ask for a quote. 📦 FAST AND SECURE FREIGHT – Professional and Secure packaging, Australia-wide delivery. 🔎 BUYER CONFIDENCE – Send your VIN to confirm exact compatibility! 📞 💬 ☎️ 0️⃣4️⃣6️⃣6️⃣ 3️⃣1️⃣3️⃣ 6️⃣2️⃣0️⃣ – Call for freight or fitment assistance.
- Pulled from a 0 Mitsubishi Asx
- Manufacturer part number: N/A
- Fitment confirmed across 26 vehicle variants - see the table below for the full list
- Used - Good condition - pulled from a wrecked or end-of-life vehicle
Compare the part number
Locate the manufacturer part number on your existing part (usually stamped, cast, or on a sticker) and message the wrecker to confirm it matches before buying.
Compare the photos
Check the 4 listing photos against your existing part. Look at bracket positions, connector shapes, mounting points, and any cosmetic damage. Use the thumbnails on the left to scroll through every angle.
Confirm with the wrecker
Tap Click to Show Phone Number in the sidebar to call Fine Global Parts directly, or message them through eBay. They can confirm compatibility, condition details, and answer any specific questions about this part before you buy.
Half the price of new
Used Mitsubishi parts from wreckers typically cost 40-70% less than buying new from a dealer.
Genuine OEM
This is a real Mitsubishi factory part - same fitment, same connectors, same finish. No aftermarket compromises.
Better for the planet
Every reused part is one less new component manufactured and one less ending up in landfill.
Protected by eBay
Buying through eBay means full Money Back Guarantee if the part isn't as described or doesn't arrive.
| Year | Make | Model | Trim | Engine | Notes |
|---|---|---|---|---|---|
| 2019 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2019 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2018 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2018 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2017 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2017 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2016 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2016 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2015 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2015 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2014 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2014 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2014 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2013 | Mitsubishi | Asx | 1798cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2013 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2013 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2013 | Mitsubishi | Asx | 2268cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2012 | Mitsubishi | Asx | 1798cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2012 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2012 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2011 | Mitsubishi | Asx | 1798cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2011 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2011 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2010 | Mitsubishi | Asx | 1798cc 110kW (Diesel) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2010 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. | |
| 2010 | Mitsubishi | Asx | 1998cc 110kW (Petrol) | Physically fits XA/XB/XC (05/2010 – 09/2019): This is the INNER tailgate-mounted section only; it will NOT fit the outer body/quarter panel section. Standard bulb-type housing—will NOT fit 11/2019+ XD series 'T-Shape' LED facelifts. You MUST visually match your lens pattern to our photos. |
Ships Australia-wide via the eBay seller. PartsOnline is not the merchant.
All parts sold by Fine Global Parts come with a standard 7-day warranty unless otherwise stated on the invoice. Warranty Coverage: Covers replacement or refund (at our discretion) for faulty or defective parts. Applies only to parts fitted correctly and used under normal operating conditions. Warranty begins from the invoice date / when delivered Warranty Does Not Cover: Incorrect installation, misuse, or abuse of the part. Labour costs, towing, fluids, or any form of consequential damage. Parts that have been modified, tampered with, or used in racing/off-road applications. Electrical items Returns & Claims: All returns must be authorised prior to return. Proof of purchase is required. Buyer is responsible for return freight. Parts must be returned in the same condition as supplied.
At Fine Global Parts, we keep Australia’s vehicles moving with precision, passion, and parts you can count on. From engine to tail light, every component we supply is carefully selected and tested — because quality without compromise is our promise. Our motto is: Excellence in every part, reliability in every mile. Our team doesn’t just sell parts — we offer service that exceeds expectations, with expert advice and genuine support at every step of your journey. Above all, we believe trust is earned daily. That’s why thousands of drivers, workshops, and auto enthusiasts across Australia choose Fine Global Parts as their go-to partner. Fine Global Parts – Trusted Auto Parts Supplier Australia Wide ✅ Quality Checked ✅ Fast Dispatch ✅ Reliable
More parts from Fine Global Parts
More Mitsubishi parts on PartsOnline
About buying through PartsOnline
- Australian wreckers since 2008. PartsOnline is one of Australia's oldest used-parts directories, connecting buyers with vetted wreckers across every state.
- Direct supplier contact. Each listing shows the wrecker's phone, location, and operating hours so you can confirm fitment, freight, and warranty before you buy.
- 14-day eBay buyer protection. When the listing is purchased through eBay, you get eBay's Money Back Guarantee on top of any wrecker-specific warranty.
Can't find the right part? Submit a parts request